Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain User Manual - Page 13
Browse online or download pdf User Manual for Scanner Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain. Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain 26 pages. Windows 95\98\98se\me\2000\xp\vista
Also for Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain: Installation Procedures Manual (6 pages), Consumable Replacement And Cleaning Instructions (22 pages)
Print Page
3) Gently close the Document Cover.
4) Change the position of the ADF.
AUTION
The ADF can be set to any of the following three positions:
After repositioning the ADF, be sure that the ADF is firmly locked to the new position.
■
Traditional (Factory default)
■
Standard (Space-saving type and for right-handed
operators)
Slide the ADF toward the center of the scanner.
Note the following explanation in this manual is based upon
this standard type of the scanner.
■
Reversed (Space-saving type and for left-handed
operators)
Slide the ADF toward the center of the scanner, and then
rotate it counterclockwise by 180 degree.
4
Attach the Stacker and the ADF Paper Chute to the scanner.
1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.
2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.
Protruding section
• Be careful not to pinch your fingers when moving the ADF.
• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.
Hook
2 Installing the Scanner
13