Scanning
direction
4. Press the [SCAN] button.
Scanning starts.
When the scanning is completed, the ScanSnap Quick
Menu appears.
Select an action you want to perform in the Action
5.
List.
Scan2Folder:
The scanned images are saved in the specified folder in the
network.
Scan2E-mail:
An e-mail program is started with the PDF files attached
to e-mail.
Scan2Print:
The scanned images are printed with a printer.
iPhoto:
The scanned images are saved in iPhoto.
ABBYY Scan2PDF:
The scanned images are processed by ABBYY FineReader
for ScanSnap to create searchable PDFs. (This button is
displayed when ABBYY FineReader for ScanSnap is
installed.)
An application corresponding the selected action starts up
to perform the selected action.
The scanning method above is the case that the
HINT
[Use Quick Menu] is checked on the menu
displayed by clicking and holding the ScanSnap
Manager icon.
If [Use Quick Menu] is unchecked, the scanner
10 |
Set the paper facedown
on the Paper chute.
Set the backside of the
paper towards you.
[SCAN] button
scans the document after pressing [SCAN]
button, and perform the application specified by
the "Scan and Save Settings" window.
●
The ScanSnap scanner is able to scan
documents using various settings. Refer to the
"ScanSnap S510M for Mac Operator's Guide"
on the "ScanSnap Setup CD-ROM" to learn
more.
3.4. Scanning with the Carrier Sheet
If you use the Carrier Sheet, you can scan large documents
such as A3 and B4 size documents, and documents of
irregular shapes such as clippings of newspaper.
3.4.1. Creating Facing Pages in One Image
Fold the document in half, scan it in duplex scanning mode,
and then merge both front and back side images to make a
double-page spread image.
Here, as an example, this section explains how to scan an
A3-size document.
If you are scanning an A3 document, it is not possible to
load it onto the scanner as it is. Fold the document in half
and scan it following the procedure below.
1. Spread the page to be scanned facing outwards and fold
it in half from the center.
Fold it tightly and smooth out the crease so that the
folded portion does not appear puffed.
2. Open the Carrier Sheet and place the folded document
inside.
Align the fold with the right
edge of the Carrier Sheet
so that the document fits
into the Carrier Sheet at
the upper corner.
3. Load the Carrier Sheet onto the ScanSnap.
•
Load the Carrier Sheet
with the portion striped in
black and white as the
leading edge as shown in
the right figure.
•
When the Carrier Sheet is
used for scanning,
continuous scanning is
not possible. Scan one
piece or one sheet at one
time.
Print Page