A-M Systems 2100 Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Measuring Instruments A-M Systems 2100. A-M Systems 2100 19 pages. Isolated pulse stimulator

Print Page

There are three classes of specifications. Class A specifications tested in all units, and

are guaranteed. Class B specifications are inherent in the design; they are indirectly

tested and are guaranteed. Class C specifications are typical operating values which

are occasionally tested-, these are typical values, given for your information but not

guaranteed. The class for each specification is noted in the center column of the

following sections.

Inputs

Switching level

Hysteresis

Input equivalent circuit

Minimum duration

(TTL-level signal)

Open circuit condition

Timing and rate accuracy

Rate selector steps

Timing multiplier steps

Resolution

Timing error (second and later

pulses after resetting controls)

Timing error (first pulse after

readjusting timing controls)

Timing repeatability

A-M Systems

Specifications

131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324

Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525

E-mail: [email protected] * Website:

1.6 V (± 0.2 V)

approx. 50 mV

100KΩ to +5 in parallel

with no more than 35pF

> 50 ns.

defaults to high/on level

100µs to 100s in 7 steps

1% of rate selector step

size. Maximum value is

9.99 x the rate selector

step size

approx. 0.1% of the maximum

value

< 0.02% of rate selector value +

0.15 µs

an additional 0.25 µs error may

occur

< 0.01% setting + 20 ns

http://www.a-msystems.com