Fujitsu SP-1130 Consumable Replacement And Cleaning Instructions - Page 16

Browse online or download pdf Consumable Replacement And Cleaning Instructions for Scanner Fujitsu SP-1130. Fujitsu SP-1130 18 pages.

Print Page

SP1120\1125\1130 Consumable Replacement and Cleaning

Feed roller (x 2)/Eject roller (x 2)

The power must be turned on to rotate the feed/eject rollers for cleaning

Turn on the scanner.

When the operator panel is in ready status, open the ADF.

When you press the scan/stop button on the operator panel for more than 2 seconds, the feed/eject rollers

rotate

Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the roller surface,

and wipe horizontally. Wipe the whole surface by pressing the scan/stop button to rotate the rollers

Make sure that it is cleaned properly because residue on the roller will affect the feeding performance.

CAUTION

CG00002-291501

Instructions

When you press the Scan/Stop button, the feed/eject rollers rotate at the same

time. Be careful not to touch the rollers with your hand while they are rotating.

Scan/Stop Button