Brother HL-3045CN Quick Setup Manual - Page 18

Browse online or download pdf Quick Setup Manual for Print Server Brother HL-3045CN. Brother HL-3045CN 29 pages. Digital color printer
Also for Brother HL-3045CN: Specifications (2 pages)

Print Page

Other Information

CAUTION

Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure that

the product is in a safe location where it cannot be accidentally knocked-over, which could cause injury

to you and serious damage to the product. Also ensure that cords are secured so as not to pose a

tripping hazard. DO NOT place this product on an unstable cart, stand, or table. The product is heavy

and may fall, causing injury to you, and serious damage to the product.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic fields. Doing

so may interfere with the operation of the product, causing print quality problems.

• DO NOT place your product next to sources of interference, such as speakers or the base units of

non Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic timers.

Disruption of power can delete information from the product's memory.

• DO NOT connect your product to an AC power outlet on the same circuit as large appliances or other

equipment that requires a significant amount of electricity to operate. Operating this product in

conjunction with the other product(s) could create an overvoltage, tripping your circuit breaker or

blowing your fuse.

To use the product safely

Please keep these instructions for later reference and read them before attempting any maintenance. If

you do not follow these safety instructions, there is a possibility of a fire, electrical shock, burn or

suffocation.

WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you

could create an electrical short, which may create the risk of a fire.

• There are high voltage electrodes inside the product. Before you access the inside of the product,

including for routine maintenance such as cleaning, make sure you have unplugged the power cord

from the AC power outlet, as well as any Ethernet (RJ-45) cable from the product. Never push objects

of any kind into this product through cabinet slots, since they may touch dangerous voltage points or

short out parts.