AEG LTR8C6152A User Manual - Page 21
Browse online or download pdf User Manual for Washer AEG LTR8C6152A. AEG LTR8C6152A 41 pages.
9.12 Départ/Pause
Touch the Départ/Pause button to start,
pause the appliance or interrupt a running
programme.
10. SETTINGS
10.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the Anti-
allergie and the Rinçage Plus buttons
simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
10.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Taches/Prélavage and the Rinçage
Plus buttons simultaneously until the
indicator
comes on/goes off on the
display.
You can activate this option:
• After you touch the Départ/Pause button:
all the buttons and the programme dial are
deactivated (except Marche/Arrêt button ).
• Before you touch the Départ/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.3 Douceur Plus
Set the Douceur Plus option to optimise the
fabric softener distribution and improve the
fabric softness.
It is suggested when you use the fabric
softener.
This option increases slightly the
programme duration.
To activate/deactivate this option touch the
Température button and the Essorage button
20
ENGLISH
simultaneously until the
on/goes off above the
10.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a programme where
it is selectable.
• To activate/deactivate this option touch
the Option button and the Rinçage Plus
button simultaneously the relevant
indicator comes on/goes off.
This option adds two rinses and the
display shows
10.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
Marche/Arrêt button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Anti-allergie and
Rinçage Plus buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
indicator comes
indicator.
.