Fujitsu ETERNUS DX Disk User Manual - Page 24

Browse online or download pdf User Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 42 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Chapter 6

Setting Up the VMware ESX Server

6.1

For VMware vSphere

Confirm that the [Enabled] checkbox is selected under "Status" on the [General] tab and click [Config-

ure] again.

Confirm that the iSCSI name is displayed in the "iSCSI Name" column and click the [Cancel] button.

Select the [Dynamic Discovery] tab and click the [Add] button.

Enter the IP address for the iSCSI port of the connected ETERNUS DX Disk storage system as the iSCSI

server IP address, confirm that the port is set to "Port 3260" (default), and click the [OK] button.

Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as

follows.

If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-

tion process for each iSCSI port. (Repeat

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

Step 7

through

Step

9.)

ESX

P3AM-3412-13ENZ0