Fujitsu ETERNUS DX Disk Configuration Manual - Page 20

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 28 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Fujitsu ETERNUS DX Disk Configuration Manual

1. Hardware

Chapter 6

Installing the iSCSI Software Initiator and Setting Up the Server

6.2

Setting Up the Server

Set CHAP Secret.

A CHAP Secret must be set for each target set in

CHAP Secret set here must match the CHAP Secret that is to be set for Target.

Use the "iscsiutil" command to set the CHAP Secret.

# iscsiutil [iscsi-device-file] -u -W <chap-initiator-secret>

Example:

To set "mychapsecret" as the CHAP Secret for a specific target (192.1.1.120):

# iscsiutil -u -W mychapsecret -I 192.1.1.120

6.2.5

Server Settings when Bidirectional CHAP Authentication is Used

The following items are required for bidirectional CHAP authentication and must be set:

NAS Hostname

•

CHAP Secret

•

RADIUS Server Hostname

•

iradd activation

Set the parameters relating to the NAS (Network Access Server) and RADIUS server.

Use the "iscsiutil" command to set the NAS Hostname, NAS Secret, and RADIUS Server Hostname:

# iscsiutil [iscsi-device-file] -u -R <nas-hostname>

Description of the NAS and RADIUS parameters:

Setting item

<nas-hostname >

<nas-secret >

<radius-server-hostname >

Activate the daemon (iradd) that communicates with the RADIUS server.

# iradd

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

[-T <target-name> [-I <ip-address>] [-P <tcp-port>]

[-M <portal-grp-tag>]]

<nas-secret> <radius-server-hostname>

Description

Specify the IP address or hostname of the Network Access Server (NAS). This

is the server that is to connect to the ETERNUS DX via the iSCSI interface. The

specified IP address or hostname must be for a LAN card that is able to com-

municate with the RADIUS server.

Set the NAS secret already set in the RADIUS server.

Specify the IP address or hostname of the RADIUS server.

Step 4

"6.2.3 iSCSI Basic Settings" (page

17). The

P3AM-3402-14ENZ0