Fujitsu ETERNUS DX Disk Configuration Manual - Page 19

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Chapter 5

Setting Up the Server to Recognize the Logical Units

5.1

Recognizing Logical Units with the sd Driver

Example:

#ident

"@(#)sd.conf

name="sd" class="scsi"

target=0 lun=0;

name="sd" class="scsi"

target=1 lun=0;

name="sd" class="scsi"

target=2 lun=0;

name="sd" class="scsi"

target=16 lun=0;

name="sd" class="scsi"

target=16 lun=1;

name="sd" class="scsi"

target=16 lun=2;

For direct connection

•

Set the "target=" value the same as the Loop-ID set in the [Set CA Parameters] window of ETERNUS Web

GUI or ETERNUSmgr.

The ETERNUS Web GUI or ETERNUSmgr Loop-ID is natively set as a hexadecimal value, which must be

converted to a decimal value for this setting.

•

For switch connection

Set the "target=" value the same as the target ID of the "fcp-bind-target" parameter set in the configuration

file. Refer to

5.1.2

Getting the Server to Recognize the Logical Units

The server now needs to use the new sd driver settings to recognize the logical units.

Reconfigure and reboot the server to get it to recognize the listed logical units. Execute the following

command.

# touch /reconfigure

# /usr/sbin/shutdown -y -g0 -i6

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

1.9

98/01/11 SMI"

"6.1 Setting Up the Parameters" (page

22).

P3AM-3712-15ENZ0