Fujitsu ETERNUS DX Disk Configuration Manual - Page 26

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 32 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Chapter 8

Setting Up XenServer

8.5

Setting the Multipaths

Start the maintenance mode for the server in which the multipath is configured.

When the server is in maintenance mode, the "!" image is displayed next to the XenServer icon.

Edit the "/etc/multipath.conf" file.

Check the "/etc/multipath.conf" file for the system that is used and apply the necessary changes accord-

ing to the following examples.

Depending on the XenServer version, the contents that are shown in the example may not be inclu-

ded in the "/etc/multipath.conf" file. In that case, add all the contents shown in the example into the

file.

For XenServer 7.0 and 7.1

•

Define the settings at the end of the "/etc/multipath.conf" file as shown below.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

device {

vendor

product

getuid_callout

features

hardware_handler

path_selector

path_grouping_policy

failback

rr_weight

no_path_retry

rr_min_io

path_checker

prio

}

"FUJITSU"

"ETERNUS_DXM"

"/sbin/scsi_id -g -u -s /block/%n"

"1 queue_if_no_path"

"0"

"round-robin 0"

group_by_prio

immediate

uniform

1000

tur

alua

XenServer

P3AM-4572-19ENZ0