Fujitsu ETERNUS DX Disk Configuration Manual - Page 17

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

Chapter 1

Setup Procedure for Emulex Converged Network Adapter Cards

1.2

Setting Up the Converged Network Adapter Cards

Use the following command to change the setting values when the driver parameter name is

"lpfcX_lun_queue_depth", the number of I/Os is "8", the module name is "lpfc", and the number of ports

is "2".

# esxcli system module parameters set -p "lpfc0_lun_queue_depth=8 lpfc1_lun_queue_depth=8" -m lpfc

Input the number of I/Os ("8" in this example) for each driver parameter setting.

Reboot VMware ESXi.

# reboot

After rebooting VMware ESXi, check the setting values.

~ # esxcli system module parameters list -m lpfc | grep lpfc[0-1]_lun_queue_depth

lpfc0_lun_queue_depth

lpfc1_lun_queue_depth

1.2.4.2

For VMware vSphere 5.1 or 5.0

Record the module name for the Converged Network Adapter card that is loaded into VMware ESXi.

The underlined portion indicates the loaded module name. In the following example, "lpfc820" is the

module name.

# esxcli system module list | grep lpfc

lpfc820

Module names may vary depending on the Converged Network Adapter card that is used.

Check the number of ports on the Converged Network Adapter card.

The SCSI Host numbers of the Converged Network Adapter card that are displayed represent the number

of ports.

In the following example, the number of ports is "two" since "4" and "5" (two underlined portions) are

displayed as the SCSI Host numbers of the Converged Network Adapter card.

# ls /proc/scsi/lpfc820

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

int

Max number of FCP commands we can queue to a specific LUN

int

Max number of FCP commands we can queue to a specific LUN

true

ESX

P3AM-4772-11ENZ0