Fujitsu ETERNUS DX Disk Configuration Manual - Page 3

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Print Page

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX to a server running VMware

FCoE interface.

This manual is used when performing the setup procedure described in "Setting Up the VMware ESX Server"

of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX, server, OS, Converged Network Adapter cards, and drivers.

Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations

used in this manual such as product trademarks and product names. For storage systems that are supported

by the OS, refer to the Server Support Matrix of the ETERNUS DX.

The Contents and Structure of this Manual

This manual is composed of the following two chapters and an appendix.

"Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards" (page 5)

•

This chapter describes how to set up the server and Emulex Converged Network Adapter card driver when

connecting the ETERNUS DX storage systems to the server via Emulex Converged Network Adapter cards.

"Chapter 2 Setup Procedure for QLogic Converged Network Adapter Cards" (page 21)

•

This chapter describes how to set up the server and QLogic Converged Network Adapter card driver when

connecting the ETERNUS DX storage systems to the server via QLogic Converged Network Adapter cards.

A WWN instance management table for the server which is used when checking the Converged Network

Adapter cards is described in the appendix.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

ESX and using Emulex Converged Network Adapter cards via an

Preface

ESX".

11th Edition

June 2015

ESX

P3AM-4772-11ENZ0