Fujitsu ETERNUS DX Disk Configuration Manual - Page 11

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 21 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (35 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (24 pages)

Print Page

Chapter 2

Setup Procedure for QLogic Converged Network

Adapter Cards

This chapter describes the driver setting operations required to establish a connection between a server with

QLogic Converged Network Adapter card and an ETERNUS DX.

2.1

All work after this point requires "root" privileges. When using supported combinations, this procedure is

used for all OS architectures (e.g. x86, EM64T), and Converged Network Adapter cards, BIOS versions and

driver versions.

Workflow

Setting Up the Converged Network Adapter Cards

Install the Converged Network Adapter cards, acquire their physical addresses and WWN information.

"2.2 Setting Up the Converged Network Adapter Cards" (page 12)

•

Installing the Converged Network Adapter Card Driver

Install the driver. Download the proper driver from the QLogic Corp. web-site if required.

"2.3 Installing the Converged Network Adapter Card Driver" (page 15)

•

Setting Up the Driver Parameters

Set the driver parameters by editing the configuration file.

"2.4 Setting Up the Driver Parameters" (page 16)

•

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for Linux

P3AM-6402-11ENZ0