Fujitsu ETERNUS DX S3 Series Configuration Manual - Page 6
Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX S3 Series. Fujitsu ETERNUS DX S3 Series 16 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX S3 Series: Configuration Manual (38 pages), Safety Precautions (12 pages)
![Fujitsu ETERNUS DX S3 Series Configuration Manual](/uploads/products/server2/2443346/2443346.jpg)
Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX/AF"
section of the "Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
Required Documents
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•
•
"Fabric OS Administrator's Guide Supporting Fabric OS"
"Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris"
•
"ETERNUS Web GUI User's Guide"
•
Workflow
Setting the FC Port Parameters
Set the to-server connection type.
•
"2.1.1 Setting the To-Server Connection Type (Setting the FC Port Parameters)" (page 8)
Setting the LUN Groups
Set the server accessible LUN groups.
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 9)
•
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.3 Setting the Host Responses" (page 10)
•
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2017 FUJITSU LIMITED
6
P3AM-7962-15ENZ0