Fujitsu ETERNUS DX S3 Series Configuration Manual - Page 31
Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX S3 Series. Fujitsu ETERNUS DX S3 Series 38 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX S3 Series: Configuration Manual (16 pages), Safety Precautions (12 pages)
Print Page
Chapter 11
Creating the Volumes
11.2
Creating the Logical Volumes
The [Add a Logical Volume] window will appear.
4
Specify the following items.
Specify any name for the [Logical volume NAME].
•
Specify the [Number of LOGICAL PARTITIONS], according to the following formula.
•
Logical volume capacity = logical partition size ´ number of logical partitions
Also, when creating a file system, a Journal Log is also created on the same disk, so be sure to leave
at least one logical partition in the Volume Group.
Regarding [Enable BAD BLOCK relocation?], be sure to specify "no".
•
5
After the settings are complete, exit the "smit" command.
6
Check the contents of the created logical volume.
If the logical volume name is "raid_lv6", execute the command as follows:
# lslv raid_lv6
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
31
Copyright 2018 FUJITSU LIMITED
P3AM-3782-23ENZ0