Fujitsu ETERNUS DX100 S3 Configuration Manual Server Connection - Page 6

Browse online or download pdf Configuration Manual Server Connection for Storage Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 12 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX100 S3: Configuration Manual Server Connection (12 pages), Configuration Manual (28 pages), Configuration Manual (13 pages), Setup Manual (15 pages), Safety Precautions (12 pages)

Fujitsu ETERNUS DX100 S3 Configuration Manual Server Connection
Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX"
section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE)" for each OS.
Required Documents
Fabric OS Administrator's Guide Supporting Fabric OS
ETERNUS Web GUI User's Guide
Workflow
Setting the FCoE Port Parameters
Set the to-server connection type.
"2.1.1 Setting the To-server Connection Type (Setting the FCoE Port Parameters)" (page 8)
Setting the LUN Groups
Set the server accessible LUN groups.
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 8)
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.3 Setting the Host Responses" (page 9)
6
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-7982-05ENZ0