Fujitsu ETERNUS DX100 S3 Configuration Manual - Page 7

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 28 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX100 S3: Configuration Manual Server Connection (12 pages), Configuration Manual Server Connection (12 pages), Configuration Manual (13 pages), Setup Manual (15 pages), Safety Precautions (12 pages)

Print Page

Chapter 1

Workflow

This chapter describes how to connect the ETERNUS DX storage systems to a server. The workflow is shown

below.

Workflow

Installing the iSCSI Software Initiator and Setting Up the Server

Set up the OS to connect to the ETERNUS DX.

•

"Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.

"7.2 Setting Up the Server to Recognize the Logical Units" (page 22)

•

Setting Up the Server as Required by the System Configuration

•

Set PV-Links

"Chapter 8 Setting the Multipaths" (page 24)

Set Logical Volume Manager (LVM)

•

"3.4 LVM Notes" (page 12)

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

P3AM-3402-14ENZ0