Fujitsu ETERNUS DX200 S3 Configuration Manual - Page 3

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX200 S3. Fujitsu ETERNUS DX200 S3 13 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX200 S3: Configuration Manual Server Connection (12 pages), Configuration Manual Server Connection (12 pages), Configuration Manual (28 pages), Configuration Manual (18 pages), Setup Manual (15 pages), Safety Precautions (12 pages)

Print Page

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX to a server running Solaris OS, HP-UX, AIX, Windows

XenServer

, Oracle Linux, or Oracle VM Server for x86 via a Fibre Channel interface.

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX, server, OS, Fibre Channel cards, and drivers.

Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations

used in this manual such as product trademarks and product names. For storage systems that are supported

by the OS, refer to the Server Support Matrix of the ETERNUS DX.

The Contents and Structure of this Manual

This manual is composed of the following two chapters.

"Chapter 1 Workflow" (page 6)

•

This chapter describes the workflow when setting up a storage system.

"Chapter 2 Setting Up the ETERNUS DX" (page 8)

•

This chapter describes how to set up a storage system.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

, Linux, VMware ESX, PAN Manager, Citrix

Preface

8th Edition

June 2015

P3AM-7962-08ENZ0