Fujitsu ETERNUS DX200 S3 Configuration Manual - Page 7

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX200 S3. Fujitsu ETERNUS DX200 S3 18 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu ETERNUS DX200 S3: Configuration Manual Server Connection (12 pages), Configuration Manual Server Connection (12 pages), Configuration Manual (28 pages), Configuration Manual (13 pages), Setup Manual (15 pages), Safety Precautions (12 pages)

Print Page
Fujitsu ETERNUS DX200 S3 Configuration Manual
FUJITSU Storage ETERNUS AF series and ETERNUS DX S4/S3 series

2. System Configuration

Non-stop storage systems use the transparent failover feature of Storage Cluster.
The system is configured with two ETERNUS AF/DX storage systems, the business servers, the Fibre Channel switches, and the management
servers running ETERNUS SF products.
This chapter describes the following aspects of the non-stop storage system configuration.
2.1. Example of a Non-Stop Storage Configuration
Describes a redundant configuration for business environments as a basic configuration of non-stop storage systems.
The configuration uses two ETERNUS DX200 S4 storage systems.
The management server is virtually configured in a single physical server.
2.2. Example of a Non-Stop Storage Configuration (with Redundant Management Servers)
Describes a configuration that improves the availability of non-stop storage operation and monitoring.
The configuration uses two physical servers for the management servers and uses WSFC to make them redundant.
2.3. Hardware Layout
Describes a hardware layout chosen to facilitate a response to problems at installation sites or during disasters.
2.4. Workflow for System Configuration
Describes the sequence of steps for setting up the non-stop storage system.
Copyright 2016-2017 FUJITSU LIMITED
Page 7 of 18
http://www.fujitsu.com/eternus/