Fujitsu Eternus DX410 S2 Configuration Manual - Page 4
Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX410 S2. Fujitsu Eternus DX410 S2 28 pages. Disk storage system settings
Also for Fujitsu Eternus DX410 S2: User Manual (35 pages), User Manual (42 pages), Instal Setup (20 pages), Configuration Manual (15 pages)
Print Page
Preface
The Contents and Structure of this Manual
This manual is composed of the following eight chapters.
"Chapter 1 Workflow" (page 7)
•
This chapter describes how to connect the ETERNUS DX to a server.
•
"Chapter 2 Checking the Server Environment" (page 8)
This chapter describes which servers can be connected to ETERNUS DX storage systems.
"Chapter 3 Notes" (page 9)
•
This chapter describes issues that should be noted when connecting the ETERNUS DX storage systems and
server.
"Chapter 4 Checking the Server Information" (page 13)
•
This chapter describes how to check the server information registered in the ETERNUS DX.
"Chapter 5 Setting Up the ETERNUS DX" (page 14)
•
This chapter describes how to use ETERNUS Web GUI or ETERNUSmgr to set up the ETERNUS DX storage
systems.
"Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)
•
This chapter describes how to install the iSCSI Software Initiator and set up the server.
"Chapter 7 Checking Connections" (page 22)
•
This chapter describes how to check the connection status between the server and ETERNUS DX.
"Chapter 8 Setting the Multipaths" (page 24)
•
This chapter describes the PV-Links settings.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX
4
Copyright 2014 FUJITSU LIMITED
P3AM-3402-14ENZ0