Fujitsu Eternus DX440 S2 User Manual - Page 30
Browse online or download pdf User Manual for Storage Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 42 pages. Disk storage system settings
Also for Fujitsu Eternus DX440 S2: User Manual (35 pages), Instal Setup (20 pages), Configuration Manual (28 pages), Configuration Manual (15 pages)
Print Page
Chapter 6
Setting Up the VMware ESX Server
6.2
For VMware Infrastructure 3
6.1.8
Plug-in Settings
If the SupportDesk service for VMware OS is subscribed to, "VMware Multi-Pathing plug-in for ETERNUS"
(which is a VMware multipath plug-in for an ETERNUS DX Disk storage system) can be used. VMware Multi-
Pathing plug-in for ETERNUS optimizes the VMware multipath's path fail-over function for the ETERNUS DX
Disk storage system, prevents accesses from being stopped when a path fails, and improves system reliabili-
ty.
For details on how to obtain VMware Multi-Pathing plug-in for ETERNUS, contact your sales representative.
Set up VMware Multi-Pathing plug-in for ETERNUS by following "Software Information", which is a manual
that is provided with the VMware Multi-Pathing plug-in for ETERNUS.
6.2
For VMware Infrastructure 3
Set up the VMware ESX server using the VMware Infrastructure Client. The procedures described here are
based on the following multipath configuration.
Example connection configuration
VMkernel (iSCSI Software Initiator)
IP address (1)
IP address for Service Console (2)
IP address
for iSCSI port (5)
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
VMware ESX server
VMkernel (iSCSI Software Initiator)
IP address (3)
IP address for Service Console (4)
LAN card
LAN switch
ETERNUS DX Disk storage system
Copyright 2013 FUJITSU LIMITED
LAN card
LAN switch
IP address
for iSCSI port (6)
30
®
ESX
P3AM-3412-13ENZ0