Fujitsu Eternus DX440 S2 Configuration Manual - Page 23

Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 28 pages. Disk storage system settings
Also for Fujitsu Eternus DX440 S2: User Manual (35 pages), User Manual (42 pages), Instal Setup (20 pages), Configuration Manual (15 pages)

Print Page

Fujitsu Eternus DX440 S2 Configuration Manual

1. Hardware

Chapter 7

Checking Connections

7.2

Setting Up the Server to Recognize the Logical Units

Check that all connected devices are listed in the ioscan output and "CLAIMED" is displayed in "S/W

State".

The following example shows the output of ioscan (LegacyView) when ETERNUS DX storage systems are

connected to a server.

# ioscan

H/W Path

============================================================

255/0

255/0/0.0

255/0/0.0.0

255/0/0.0.0.0

255/0/0.0.0.1

255/0/0.0.0.2

255/0/0.0.0.3

255/0/0.0.0.4

When the ETERNUS DX storage systems are connected for the first time, the device file (for exam-

ple, /dev/dsk/c4t0d0) sometimes may not be created.

If this happens, use the "insf" command to create the device file. Specify the hardware path name as

follows, and execute.

# insf -H hw_path_to_device -e

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

Class

iscsi

ext_bus

target

disk

Description

iSCSI Virtual Node

iSCSI-SCSI Protocol Interface

FUJITSU ETERNUS_DXL

P3AM-3402-14ENZ0