Fujitsu Eternus DX440 S2 Configuration Manual - Page 7
Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 28 pages. Disk storage system settings
Also for Fujitsu Eternus DX440 S2: User Manual (35 pages), User Manual (42 pages), Instal Setup (20 pages), Configuration Manual (15 pages)
Print Page
Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX storage systems to a server. The workflow is shown
below.
Workflow
Installing the iSCSI Software Initiator and Setting Up the Server
Set up the OS to connect to the ETERNUS DX.
•
"Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.
"7.2 Setting Up the Server to Recognize the Logical Units" (page 22)
•
Setting Up the Server as Required by the System Configuration
•
Set PV-Links
"Chapter 8 Setting the Multipaths" (page 24)
-
Set Logical Volume Manager (LVM)
•
"3.4 LVM Notes" (page 12)
-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX
7
Copyright 2014 FUJITSU LIMITED
P3AM-3402-14ENZ0