Fujitsu Eternus DX500 S3 Configuration Manual Server Connection - Page 10
Browse online or download pdf Configuration Manual Server Connection for Storage Fujitsu Eternus DX500 S3. Fujitsu Eternus DX500 S3 12 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Also for Fujitsu Eternus DX500 S3: Configuration Manual (28 pages), Configuration Manual (13 pages), Configuration Manual (18 pages), Safety Precautions (12 pages)
Print Page
Chapter 2
Setting Up the ETERNUS DX
2.2
Specific Settings
2.1.6
Allocating LUN Groups (Setting the Host Affinity)
Allocate the relationship between registered FCoE hosts (WWN), CA port groups, and LUN groups using the
Host Affinity setting function to specify which LUNs to be accessed. This sets access restrictions to the ETER-
NUS DX from each server.
Refer to "Connectivity Management" in "ETERNUS Web GUI User's Guide" for details, and set the LUN groups.
If the one-to-one relationship between the WWNs and Converged Network Adapter cards cannot be deter-
mined, the Host Affinity may not be set correctly.
In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX
logical disks.
2.2
Specific Settings
Specific settings for the OS and connection configuration are not required.
2.2.1
Setting the CA Reset Groups
Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset
group settings do not need to be changed.
2.3
Checking the WWNs
Use ETERNUS Web GUI to check the WWN of each ETERNUS DX. They are required for connecting the ETERNUS
DX to the server.
10
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-7982-05ENZ0