Fujitsu ETERNUS DX60 Package Contents - Page 4

Browse online or download pdf Package Contents for Storage Fujitsu ETERNUS DX60. Fujitsu ETERNUS DX60 4 pages. Disk storage system
Also for Fujitsu ETERNUS DX60: Setup Manual (4 pages), User Manual (35 pages), User Manual (42 pages), Setup Manual (4 pages), Using Optional Products (2 pages), Configuration Manual (28 pages), Configuration Manual (16 pages), Using Optional Products (2 pages), Product Introduction (19 pages), Manual (4 pages)

Print Page
Fujitsu ETERNUS DX60 Package Contents
*3:
Confirm that there are no parts missing from the rack mount kit (for AC outlet box (1U)).
Two brackets
for left and right
Two holders (for left and right)
Both holders are
the same shape.
Four M6 screws
for attaching the brackets and hold-
ers
*4:
Confirm that there are no parts missing from the rack mount kit (for AC outlet box (2U)).
One blank panel (2U)
Copyright 2009 FUJITSU LIMITED
This manual uses recycled paper.
With 8 M3
screws attached.
Both brackets are
the same shape.
Four screw holders
for attaching the brackets and
holders
For use with
square rack pillar holes.
Two M3 screws
for attaching the AC outlet box
One blank panel (1U)
Twelve M5 screws
for attaching AC outlet box (×8)
and blank panel (×4)
ETERNUS DX60/DX80 Disk storage system
Issuance responsibility: FUJITSU LIMITED
•
The contents of this manual may be updated without notice.
•
While the contents of this manual are the product of all due care
and diligence, no responsibility can be accepted for operational
problems arising from any errors or missing information, or other
use of the information contained in this manual.
•
Fujitsu assumes no liability for damages to third party copyrights or
other rights arising from the use of any information in this manual.
•
Contents of this manual are not to be reproduced without permission
from Fujitsu.
•
Manuals with missing or wrongly collated pages will be replaced
free of charge.
Two black M5 screws
for attaching the blank panel
Two rack nuts
for attaching the blank panel
For use with
round rack pillar holes.
Two M5 cage nuts
for attaching the blank panel
For use with
square rack pillar holes.
Twelve rack nuts
for attaching AC outlet box (×8)
and blank panel (×4)
For use with
round rack pillar holes.
Twelve M5 cage nuts
for attaching AC outlet box (×8)
and blank panel (×4)
For use with
square rack pillar holes.
Package Contents
P3AM-3062-03EN
Date of issuance: October 2009
Printed in Japan