Fujitsu ETERNUS DX60 S2 User Manual - Page 12

Browse online or download pdf User Manual for Storage Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 42 pages. Server connection. (fibre channel) for aix
Also for Fujitsu ETERNUS DX60 S2: User Manual (35 pages), Configuration Manual (28 pages), User Manual (14 pages), Configuration Manual (16 pages), Configuration Manual (38 pages), Hardware And Software Installation Manual (36 pages)

Print Page

Chapter 3

Notes

Note the following issues when connecting the ETERNUS DX Disk storage system to a server.

3.1

3.1.1

Dedicated IP addresses must be allocated to the iSCSI LAN. An IP address must be allocated to each VMkernel

that corresponds to an iSCSI Initiator, and a LAN card and VMkernel must be connected via a virtual switch.

●

For the ETERNUS DX Disk storage system

For example, a total of four IP addresses are required by the following iSCSI connection setup.

Example connection configuration

VMkernel (iSCSI Software Initiator)

IP address (1)

IP address

for iSCSI port (3)

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

VMware ESX server

LAN card

LAN switch

ETERNUS DX Disk storage system

VMkernel (iSCSI Software Initiator)

IP address (2)

LAN card

LAN switch

IP address

for iSCSI port (4)

ESX

P3AM-3412-13ENZ0