Fujitsu ETERNUS DX60 S2 User Manual - Page 22

Browse online or download pdf User Manual for Storage Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 42 pages. Server connection. (fibre channel) for aix
Also for Fujitsu ETERNUS DX60 S2: User Manual (35 pages), Configuration Manual (28 pages), User Manual (14 pages), Configuration Manual (16 pages), Configuration Manual (38 pages), Hardware And Software Installation Manual (36 pages)

Print Page

Chapter 6

Setting Up the VMware ESX Server

6.1

For VMware vSphere

6.1.3

Creating the Virtual Switches

Add two virtual switches (vSwitch) for iSCSI to VMware ESX. Add a "VMkernel" and "vmnic" for each vSwitch.

Perform the following procedure to each vmnic that configures iSCSI SAN.

Open the network window by selecting the [Configuration] tab on vSphere Client and click [Add Net-

work] in the upper right of the window.

Select [VMkernel] and click the [Next] button.

Select the checkbox of the target network adapter and click the [Next] button.

Set properties of port groups as required, and click the [Next] button.

Set the IP address and subnet mask of "VMkernel", and click the [Next] button.

Repeat

Step 1

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

through

Step 5

to add another virtual switch (vSwitch2).

ESX

P3AM-3412-13ENZ0