Fujitsu ETERNUS DX80 Configuration Manual - Page 7

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX80. Fujitsu ETERNUS DX80 16 pages. Disk storage system
Also for Fujitsu ETERNUS DX80: Setup Manual (4 pages), User Manual (35 pages), User Manual (42 pages), Setup Manual (4 pages), Using Optional Products (2 pages), Configuration Manual (28 pages), Using Optional Products (2 pages), Product Introduction (19 pages), Package Contents (4 pages), Manual (4 pages)

Print Page
Fujitsu ETERNUS DX80 Configuration Manual
Chapter 1
Workflow
Setting the Affinity Groups
Set the server accessible LUN groups.
"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)
•
Setting the Host Affinity
Define the relationship between the registered Host Affinity and the FC host.
"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)
•
Setting the Reset Groups
Assign the ports of the ETERNUS DX to the same reset group, depending on the connection conditions.
•
"2.2.1 Setting the Reset Groups" (page 13)
Setting the Subsystem Parameters (for HP-UX only)
Set whether to enable [Disable Load Balance], a function that restricts retry-required sense responses
when the ETERNUS DX is in overload.
•
"2.2.2 Setting the Subsystem Parameters (for HP-UX only)" (page 14)
Checking the WWNs
Check information that is necessary for connecting to the server.
"2.3 Checking the WWNs" (page 14)
•
After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
7
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-3182-15ENZ0