Fujitsu Eternus DX80 S2 Configuration Manual - Page 9

Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 15 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX80 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Configuration Manual Server Connection (13 pages), Hardware Installation (23 pages), Configuration Manual (28 pages), Configuration Manual (38 pages)

Print Page

Fujitsu Eternus DX80 S2 Configuration Manual

Chapter 2

Setting Up the ETERNUS DX

2.1

Common Settings

*1: Set the appropriate value from the following table. Do not use [Auto-negotiation].

Table 2.2 Transfer Rate setting values (for FC-AL connection)

Fibre Channel card maxi-

mum speed

16Gbit/s

8Gbit/s

4Gbit/s

2Gbit/s

Table 2.3 FC port parameter settings (Fabric connection)

Parameter

Connection

Transfer Rate

FC Frame Size

Reset Scope

Release Reservation if Chip is Reset

*1: Set the appropriate value from the following table.

Table 2.4 Transfer Rate setting values (for Fabric connection)

Fibre Channel switch maxi-

mum speed

16Gbit/s

8Gbit/s

4Gbit/s

2Gbit/s

*1: Specify "Auto Negotiation" for direct connections to 16Gbit/s Brocade Fibre Channel cards.

When using a Fabric connection, complete the preparatory work and set up the Fibre Channel switch be-

forehand. For setting details, refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connec-

tion- (Fibre Channel) Fibre Channel Switch Settings" or "Fabric OS Administrator's Guide".

Transfer rate setting value

16Gbit/s CA

—

8Gbit/s

4Gbit/s

—

Transfer rate setting value

16Gbit/s CA

16Gbit/s (*1)

8Gbit/s

4Gbit/s

—

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

8Gbit/s CA

8Gbit/s

4Gbit/s

2Gbit/s

Setting value

Fabric

See the table below (*1)

2048

I_T_L

Disable

8Gbit/s CA

8Gbit/s

4Gbit/s

2Gbit/s

4Gbit/s CA

4Gbit/s

2Gbit/s

4Gbit/s CA

4Gbit/s

2Gbit/s

P3AM-5332-15ENZ0