Fujitsu Eternus DX80 S2 Configuration Manual - Page 32

Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 38 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX80 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Configuration Manual Server Connection (13 pages), Hardware Installation (23 pages), Configuration Manual (28 pages), Configuration Manual (15 pages)

Print Page
Fujitsu Eternus DX80 S2 Configuration Manual
Chapter 11
Creating the Volumes
11.2
Creating the Logical Volumes
7
Check that the [BB POLICY:] parameter is shown as "non-relocatable".
If not, re-execute the "smit" command and try again.
LOGICAL VOLUME:
LV IDENTIFIER:
VG STATE:
TYPE:
MAX LPs:
COPIES:
LPs:
STALE PPs:
INTER-POLICY:
INTRA-POLICY:
MOUNT POINT:
MIRROR WRITE CONSISTENCY: on
EACH LP COPY ON A SEPARATE PV ?: yes
Execute this command for all logical volumes created on ETERNUS DX/AF storage systems' LUNs to
disable [Bad Block Relocation].
If [Redistribution of bad blocks] is not disabled, file system may be damaged.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
raid_lv6
000972ca57abbe2b.l
active/complete
jfs
512
1
500
0
minimum
middle
/mnt/raid_lv6
32
Copyright 2018 FUJITSU LIMITED
VOLUME GROUP:
raid_vg6
PERMISSION:
read/write
LV STATE:
opened/syncd
WRITE VERIFY:
off
PP SIZE:
4 megabyte(s)
SCHED POLICY:
parallel
PPs:
500
BB POLICY:
non-relocatable
RELOCATABLE:
yes
UPPER BOUND:
32
LABEL:
/mnt/raid_lv6
P3AM-3782-23ENZ0