Fujitsu Eternus DX90 Configuration Manual - Page 7
Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX90. Fujitsu Eternus DX90 16 pages. Disk storage system
Also for Fujitsu Eternus DX90: User Manual (35 pages), Using Optional Products (2 pages)
Print Page
Chapter 1
Workflow
Setting the Affinity Groups
Set the server accessible LUN groups.
"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)
•
Setting the Host Affinity
Define the relationship between the registered Host Affinity and the FC host.
"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)
•
Setting the Reset Groups
Assign the ports of the ETERNUS DX to the same reset group, depending on the connection conditions.
•
"2.2.1 Setting the Reset Groups" (page 13)
Setting the Subsystem Parameters (for HP-UX only)
Set whether to enable [Disable Load Balance], a function that restricts retry-required sense responses
when the ETERNUS DX is in overload.
•
"2.2.2 Setting the Subsystem Parameters (for HP-UX only)" (page 14)
Checking the WWNs
Check information that is necessary for connecting to the server.
"2.3 Checking the WWNs" (page 14)
•
After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
7
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-3182-15ENZ0