Fujitsu Eternus DX90 S2 Configuration Manual Server Connection - Page 6

Browse online or download pdf Configuration Manual Server Connection for Storage Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 13 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX90 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Hardware Installation (23 pages), Configuration Manual (28 pages), Configuration Manual (15 pages), Configuration Manual (38 pages)

Print Page
Fujitsu Eternus DX90 S2 Configuration Manual Server Connection
Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX"
section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS)" for each OS.
Required Documents
ETERNUS Web GUI User's Guide
•
Workflow
Setting the SAS Port Parameters
Set the to-server connection type.
"2.1.1 Setting the To-server Connection Type (Setting the SAS Port Parameters)" (page 8)
•
Setting the LUN Groups
Set the server accessible LUN groups.
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 8)
•
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.3 Setting the Host Responses" (page 9)
•
6
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-5352-11ENZ0