Fujitsu ETERNUS2000 200 Server Connection Manual - Page 13

Browse online or download pdf Server Connection Manual for Storage Fujitsu ETERNUS2000 200. Fujitsu ETERNUS2000 200 25 pages. Disk storage systems (fibre channel) for oracle solaris
Also for Fujitsu ETERNUS2000 200: Manual (28 pages), Manual (21 pages), Server Connection Manual (32 pages), Setup Manual (4 pages), Connection Manual (19 pages), Using Optional Products (2 pages)

Print Page

Fujitsu ETERNUS2000 200 Server Connection Manual

Chapter 5

5.1

Preparation

5.1.1

Installing the "open-iscsi" package

Red Hat Package Manager (RPM) is used to set up the iSCSI environment in the Linux server.

Check that one of the following RPMs is installed. If not, install it.

For SLES10 SP2: open-iscsi-2.0.707-0.44.<Architecture name> or later

Installation execution example

# rpm -ivh open-iscsi-2.0.707-0.19.<Architecture_name>.rpm

5.1.2

Preparing the device-mapper multipath setup

Use the following Red Hat Package Manager (RPM) to set up the device-mapper multipaths. If

this RPM is not installed, install it.

device-mapper-1.02.03-8.2.<Architecture_name> or later

device-mapper-32bit-1.02.03-8.2.<Architecture_name> or later

multipath-tools-0.4.6-25.17.<Architecture_name> or later

Installation execution example

# rpm -ivh device-mapper-1.02.03-8.2.<Architecture_name> or later

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

Setting Up the Linux Server