Fujitsu ETERNUS2000 200 Server Connection Manual - Page 22

Browse online or download pdf Server Connection Manual for Storage Fujitsu ETERNUS2000 200. Fujitsu ETERNUS2000 200 25 pages. Disk storage systems (fibre channel) for oracle solaris
Also for Fujitsu ETERNUS2000 200: Manual (28 pages), Manual (21 pages), Server Connection Manual (32 pages), Setup Manual (4 pages), Connection Manual (19 pages), Using Optional Products (2 pages)

Print Page

Fujitsu ETERNUS2000 200 Server Connection Manual

Chapter 9 Setting Up and Checking the device-mapper multipath

9.2 Enabling the device-mapper multipath

9.2

Enabling the device-mapper multipath

Execute the following command to enable the device-mapper multipaths.

# insserv boot.multipath multipathd

# chkconfig multipathd on

# chkconfig boot.multipath on

# /etc/init.d/boot.multipath start

# /etc/init.d/multipathd start

9.3

Rebooting the Linux Server

Reboot the Linux server.

Execution example

# shutdown -r now

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

•

For SLES10

devices {

device {

vendor

product

prio_callout

path_grouping_policy

path_selector

failback

no_path_retry

}

For the ETERNUS2000, specify "E2000" as the "product" option.

For the ETERNUS4000, specify "E4000" as the "product" option.

For the ETERNUS8000, specify "E8000" as the "product" option.

The blacklist section is used to specify any internal disks or other devices that are to be

excluded from the multipath configuration. If required, refer to the Novell web-site for

details.

"FUJITSU"

"E2000"

"/sbin/mpath_prio_alua %d"

multibus

"round-robin 0"

immediate

End of procedure