Fujitsu ETERNUS2000 model 100 Connection Manual - Page 10

Browse online or download pdf Connection Manual for Storage Fujitsu ETERNUS2000 model 100. Fujitsu ETERNUS2000 model 100 31 pages. Disk storage system
Also for Fujitsu ETERNUS2000 model 100: Manual (28 pages), Server Connection Manual (25 pages), Server Connection Manual (32 pages), Connection Manual (19 pages)

Print Page

Fujitsu ETERNUS2000 model 100 Connection Manual

Chapter 1 Workflow

1.1 When the Multipath Driver is not Used

P3AM-4212-02ENZ0

ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux

Install the SAS Card Driver

Install the appropriate driver for the SAS card being used.

Refer

Checking the SAS Card driver versions

•

"Chapter 6 Installing the SAS Card Drivers" (page 17)

•

"Server Support Matrix"

Set Up the Linux Server

Set the parameters required for connection to the ETERNUS Disk storage system.

Refer

"7.1 For Fujitsu SAS Cards" (page 18)

"7.2 For LSI Logic SAS Cards" (page 18)

Set the Server to Recognize the Logical Units

Set up the server so that it can recognize the ETERNUS Disk storage systems' LUN

(logical units).

Refer

"Chapter 8 LUN Recognition" (page 19)