Fujitsu ETERNUS4000 400 Server Connection Manual - Page 22
Browse online or download pdf Server Connection Manual for Storage Fujitsu ETERNUS4000 400. Fujitsu ETERNUS4000 400 25 pages. Disk storage systems (fibre channel) for oracle solaris
Also for Fujitsu ETERNUS4000 400: Manual (28 pages), Manual (21 pages), Server Connection Manual (32 pages), Connection Manual (19 pages)
Print Page
Chapter 9 Setting Up and Checking the device-mapper multipath
>
9.2 Enabling the device-mapper multipath
9.2
Enabling the device-mapper multipath
Execute the following command to enable the device-mapper multipaths.
# insserv boot.multipath multipathd
# chkconfig multipathd on
# chkconfig boot.multipath on
# /etc/init.d/boot.multipath start
# /etc/init.d/multipathd start
9.3
Rebooting the Linux Server
Reboot the Linux server.
Execution example
# shutdown -r now
P3AM-4152-02ENZ0
ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux
(SUSE Linux Enterprise Server)
•
For SLES10
devices {
device {
vendor
product
prio_callout
path_grouping_policy
path_selector
failback
no_path_retry
}
}
For the ETERNUS2000, specify "E2000" as the "product" option.
For the ETERNUS4000, specify "E4000" as the "product" option.
For the ETERNUS8000, specify "E8000" as the "product" option.
The blacklist section is used to specify any internal disks or other devices that are to be
excluded from the multipath configuration. If required, refer to the Novell web-site for
details.
"FUJITSU"
"E2000"
"/sbin/mpath_prio_alua %d"
multibus
"round-robin 0"
immediate
10
22
End of procedure
Copyright 2010 FUJITSU LIMITED