Fujitsu ETERNUS8000 1100 Server Connection Manual - Page 22
Browse online or download pdf Server Connection Manual for Storage Fujitsu ETERNUS8000 1100. Fujitsu ETERNUS8000 1100 32 pages. Disk storage systems (fibre channel) for oracle solaris
Also for Fujitsu ETERNUS8000 1100: Manual (28 pages), Manual (21 pages), Server Connection Manual (25 pages), Connection Manual (19 pages)
Print Page
Chapter 8
Install the Fibre Channel card driver, and the driver for ETERNUS Disk storage systems or either
the Windows Server® 2008 R2 or the Windows Server® 2008 standard multipath driver (msdsm)
on the server, and then perform configuration.
8.1
Fibre Channel Card Driver Installation
Refer to each "ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for
Windows® Driver Settings" for detailed setting procedures:
•
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
8.2
Multipath Environment Configuration
Multipath environment configuration differs depending on the multipath driver that is used.
•
When using the multipath driver for ETERNUS Disk storage systems
Refer to
•
When using either the Windows Server® 2008 R2 or the Windows Server® 2008 standard
multipath driver (msdsm)
Refer to
Server® R2 or Windows Server® 2008" (page
8.2.1
Configuring ETERNUS Multipath or GR Multipath
Install the driver for ETERNUS Disk storage systems as required.
Refer to
cases such as when connecting the server to the ETERNUS Disk storage system in multipath
configuration and using the path redundancy control (path fail-over) function, and for when
single-path connection is used between the ETERNUS Disk storage system and server.
For the procedure about how to install (or uninstall), setup, and use the drivers for ETERNUS
Disk storage systems, refer to the software manuals.
P3AM-2922-05ENZ0
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Installing Drivers
-
Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series
-
Driver Settings for PRIMEQUEST 500/400 Series
-
Driver Settings for Emulex Fibre Channel Cards
-
Driver Settings for QLogic Fibre Channel Cards
"8.2.1 Configuring ETERNUS Multipath or GR Multipath" (page
"8.2.2 Configuring the Standard Multipath Driver (msdsm) Environment for Windows
"3.4 ETERNUS Disk Storage System Driver Notes" (page 14)
23).
22
22).
for notes about drivers in
Copyright 2010 FUJITSU LIMITED