Fujitsu FD-1100MT User Manual - Page 36
Browse online or download pdf User Manual for Storage Fujitsu FD-1100MT. Fujitsu FD-1100MT 40 pages. Servis drawer 17inch
Print Page
Uneven thickness of
letters, subject to the
position displayed in
monitor
Poor screen quality
(Faded images, blurred
characters, etc.)
Window shifts or does not
display when switching
10.5 Others
Symptom
Keyboard and mouse
do not operate, or
operate strangely.
Operation stops after a
period of normal
operation.
The auto scan switch
cycle is abnormal.
The setting in FOCUS and
CLOCK is not proper.
Displayed in lower resolution
less than 1280 x 1024.
Connection/cable is defective.
Adjustment of monitor does not
give suitable results.
Wrong resolution.
Cause
The key repeat is abnormal.
A non-specified cable is used.
Connection has been
disrupted.
A problem has occurred at the
server.
The switch cycle has not been
adjusted.
(The default value is 10 seconds)
Adjust setting in CLOCK, then adjust
the setting in FOCUS.
Full-screen display is made by digital
interpolation of the low-res output, not
by physical magnification. So, letters
may be blurred and the thickness of
thin lines might be uneven by this
scaling function. This is not a display
failure, and the device can be used
normally.
Set resolution as 1280 x 1024 in
"property of monitor" in server, for
displaying in best mode.
Confirm the connector connection.
Replace with a different cable. If this
solves the problem, replace with a
new cable.
Push Auto switch.
Adjust the resolution or change the
monitor settings.
Action
Change the speed setting for the
key repeat on the server.
Use a specified cable.
Check the connections and then
restart.
Correct the problem at the server.
Use the cursor keys (↑ and ↓) to adjust
it.
32