Fujitsu GP5-HD8G1 User Manual - Page 12

Browse online or download pdf User Manual for Storage Fujitsu GP5-HD8G1. Fujitsu GP5-HD8G1 14 pages.

Print Page

2 Notes on Settings

If the setting pins need to be changed, use caution to prevent damage to the PC board
●
beneath them.
Do not touch any other pins and/or switches other than the SCSI ID setting pin.
●

3 Notes on Handling

CAUTION
!
The hard disk is a precision device. Strictly observe the following when handling the prod-
uct; otherwise, the product and/or the data in the disk may be destroyed.
Do not touch the connector section and/or the component installation surface of the PC
●
board when handling the product.
Be sure not to drop or mishandle the product in any way until the bottom of the product
●
completely touches the desk surface when the product is to be placed on the desk.
Before carrying out the following operation, turn off the power and wait until the disk
●
completely stops rotating (about 30 seconds).
– Removing this product
– Changing the settings
Do not use or store the product in the following locations:
●
– Near a magnet or strong magnetic field
– Near a heater or anywhere the product would be exposed to direct sun light
– Any location subject to extreme temperature or humidity changes
– Any wet or dusty location
– Any location subject to vibration or shock
Use a soft dry cloth to wipe dust from the product. Do not use volatile agents such as
●
benzine or thinner.
Do not disassemble the product.
●
Do not touch pins other than the setting pins.
●
E
3