AEG PNC914580203 User Manual - Page 20
Browse online or download pdf User Manual for Washer AEG PNC914580203. AEG PNC914580203 48 pages.
Print Page
20
www.aeg.com
6.8 Permanent Soft Plus
Set this option to optimise the fabric
softener distribution and improve fabric
softness.
Recommended when you use fabric
softener.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
6.9 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
To activate/deactivate this option, hold
the Soft Plus button pressed for 3
seconds until the indicator
goes off on the display.
When it is activated, the appliance will
default to this option after you switch it
off or change/reset the programme.
This option increases the
programme duration.
6.10 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
The corresponding indicator above the
touch button illuminates.
The indicator
steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows
and the indicator
drum performs smooth movements for
about 30 minutes to keep the steam
benefit. By touching any button the anti-
comes on/
is steady on during
, the indicator
goes off
is steady on. The
crease movements stop and the door
unlocks.
A small laundry load helps to
reach better results.
6.11 Child Lock
With this option you can prevent children
from playing with the control panel.
To activate/deactivate this option, hold
the Plus Steam button pressed until the
indicator
comes on/goes off on the
display.
When it is activated, the appliance will
default to this option after you switch it
off or change/reset the programme. If
you press any button, the indicator
blinks to indicate that the buttons are
disabled.
The Child Lock function may not be
available for a few seconds after
switching the appliance on.
6.12 Delay Start
With this option you can delay the start
of a programme to a more convenient
time.
Touch the button repeatedly to set the
required delay. The time increases in
steps of 1 hour up to 20 hours.
The display shows the indicator
the selected delay time. After touching
the Start/Pause button, the appliance
begins the countdown and the door is
locked.
6.13 Time Save
With this option you can reduce the
programme duration depending on the
load size and the degree of soiling.
When you set a washing programme, the
display shows the default duration and
dashes.
Touch Time Save button to reduce the
programme duration according to your
needs. The display shows the new
programme duration and a number of
dashes will decrease accordingly:
and