AEG PowerCare LR86CB86 User Manual - Page 19
Browse online or download pdf User Manual for Washer AEG PowerCare LR86CB86. AEG PowerCare LR86CB86 48 pages.
Print Page8.5 Factory Defaults
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
On/Off button.
9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
10. PROGRAMMES
10.1 Programme Chart
The programmes are described in this chart following the order of the
selector dial from the top to the bottom.
Washing programmes
Programme
PowerClean 59min
Eco 40-60
Cottons
Synthetics
Delicates
2. Press and hold the Stains/Prewash
3. The display will show
3. Pour 2 litres of water into the
This action activates the drain system.
4. Pour a small quantity of detergent
5. Set and start a programme for cotton
This removes all possible dirt from the
drum and the tub.
Programme description
Cotton and mixed synthetic fabrics. Ideal to wash your daily
load in a short time, for a better clothes care and good cleaning
already at 30°C.
Low energy cycle for cottons. Decreases temperature and ex‐
tends time to reach good washing results.
White and coloured cotton fabrics. Ideal for normal and heavy
soil.
Synthetic items or mixed fabric items. Normal soil.
Delicate fabrics such as acrylics, viscose and mixed fabrics re‐
quiring gentler washing. Normal soil.
and Time Save buttons for some
seconds.
about 5 seconds.
detergent compartment marked by
.
into the compartment marked by
at the highest temperature without
any laundry in the drum.
ENGLISH
19
for
.