AEG ProSense 6000 Series User Manual - Page 19

Browse online or download pdf User Manual for Washer AEG ProSense 6000 Series. AEG ProSense 6000 Series 40 pages.

Print Page

10.2 Acoustic signals

The acoustic signals operate when the

programme is completed (sequence of

sounds for about 2 minutes).

To deactivate/activate the acoustic signals,

touch the Tijd besparen and the Startuitstel

buttons simultaneously for about 6 seconds.

If you deactivate the acoustic signals,

they continue operate when the

appliance has a malfunction.

11. BEFORE FIRST USE

1. Make sure that all transit bolts have been

removed from the appliance.

2. Make sure that the electrical power is

available and the water tap is open.

3. Pour a small quantity of detergent into the

compartment marked

12. DAILY USE

WARNING!

Refer to Safety chapters.

12.1 Activating the appliance

1. Connect the mains plug to the mains

socket.

2. Open the water tap.

3. Press the button for a few seconds to

activate the appliance.

A short tune sounds (if activated).

12.2 Loading the laundry

1. Open the appliance door.

2. Shake the items before you put them in

the appliance.

3. Put the laundry in the drum, one item at a

time.

Make sure not to put too much laundry in the

drum.

4. Close the door firmly.

10.3 Permanent Extra Rinse

With this option you can permanently have an

extra rinse when you set a new programme.

• To activate/deactivate this option touch

4. Set and start a programme for cotton at

This removes all possible dirt from the drum

and the tub.

Make sure that no laundry stays between

the seal and the door. There is a risk of

water leakage or damage to the laundry.

Washing heavily oiled, greasy stains

could cause damage rubber parts of the

appliance.

the Temperatuur button and the

Centrifugeren button simultaneously until

relevant indicator

on display.

the highest temperature without any

laundry in the drum.

CAUTION!

comes on/goes off

ENGLISH