Brother MFC-9420CN Quick Setup Manual - Page 10
Browse online or download pdf Quick Setup Manual for Print Server Brother MFC-9420CN. Brother MFC-9420CN 40 pages. Quick setup guide - english
Also for Brother MFC-9420CN: Quick Setup Manual (40 pages), Service Manual (13 pages)
Print Page
Step 1
Install the Power Cord
5
and Phone Line
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord
to the jack on the machine marked LINE
and the other end to a modular wall jack.
Warning
■ The machine must be grounded using a 3-prong
plug.
■ Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
8
Setting Up the machine
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to
TAD.
For more details, see "Connecting an
external telephone answering device (TAD)"
in Chapter 3 of the User's Guide.
TAD
TAD
External