Brother MFC-J4310DW Quick Setup Manual - Page 6

Browse online or download pdf Quick Setup Manual for Print Server Brother MFC-J4310DW. Brother MFC-J4310DW 47 pages. Air print guide - spanish
Also for Brother MFC-J4310DW: Manual (36 pages), Manual (22 pages), Product Safety Manual (17 pages), Manual (13 pages), Manual (13 pages), Product Safety Manual (20 pages), (Spanish) Guia De Web Connect Manual (38 pages), (Spanish) Manual (24 pages), (Spanish) Guia De Seguridad Del Producto Manual (16 pages), (Spanish) Manual (12 pages), (Spanish) Manual (11 pages)

Print Page

Remove the orange protective part a.

NOTE

Do not throw away the orange protective part.

You will need it if you transport the machine.

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a counterclockwise until it

clicks to release the vacuum seal. Then

remove the orange protective packing a as

shown.

IMPORTANT

• DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

• DO NOT touch the cartridge in the area

indicated b, as this can cause the machine not

to function with the cartridge.

Take care to match the sticker color a with the

cartridge color b as shown in the diagram

below.

Install each ink cartridge in the direction of the

arrow on the label.

Gently push the back of the ink cartridge

marked "PUSH" until it latches. After all the ink

cartridges are installed close the ink cartridge

cover.

NOTE

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.