Brother QL-1060N Network User's Manual - Page 13

Browse online or download pdf Network User's Manual for Print Server Brother QL-1060N. Brother QL-1060N 42 pages. Label printer
Also for Brother QL-1060N: User Manual (42 pages), Software User's Manual (40 pages), Network User's Manual (48 pages), Software User's Manual (48 pages), Network User's Manual (41 pages), User Manual (40 pages), User Manual (48 pages), User Manual (41 pages), User Manual (24 pages)

Print Page

IP addresses, subnet masks and gateways

To use the machine in a networked TCP/IP environment, you need to configure the IP address and subnet

mask. The IP address you assign to the print server must be on the same logical network as your host

computers. If it is not, you must properly configure the subnet mask and the gateway address.

An IP address is a series of numbers that identifies each computer connected to a network. An IP address

consists of four numbers separated by dots. Each number is between 0 and 255.

Example: In a small network, you would normally change the final numbers.

• 192.168.1.1

• 192.168.1.2

• 192.168.1.3

How the IP address is assigned to your print server:

If you have a DHCP/BOOTP/RARP server in your network (typically a Windows

Windows Server

2003, or UNIX

the server and register its name with any RFC 1001 and 1002-compliant dynamic name services.

Note

On smaller networks, the DHCP server may be the router.

For details on DHCP, BOOTP and RARP, see Using DHCP to configure the IP address on page 28, Using

BOOTP to configure the IP address on page 28 and Using RARP to configure the IP address on page 29.

If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will

automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255. For details on APIPA,

see Using APIPA to configure the IP address on page 30.

If the APIPA protocol is disabled, the IP address of a Brother print server is 192.0.0.192. However, you can

easily change this IP address number to match with the IP address details of your network. For details on

how to change the IP address, see Setting the IP address and subnet mask on page 10.

/Linux network) the print server will automatically obtain its IP address from

Configuring your network printer

2000/XP, Windows Vista