4
In the [Distributed Printing Settings]
dialog box, select the printers to be used
for distributed printing.
1.Click [Detect Current Paper Information...].
2.The current printer information that was
detected appears below "Current paper" and
"Paper Type".
3.Select the check box beside the "Printer Name"
to be used for distributed printing.
If multiple printers are connected, you can find the desired printer from its port name.
The xxxxxxxxxxxx in BRNxxxxxxxxxxxx in the port name indicates the MAC address/Ethernet
address of the printer.
The MAC address/Ethernet address can be checked by printing the printer set-up information.
Press and hold down the Cut button when the power is on to print the printer set-up information.
5
Specify the label size to be used for
printing.
A. If only one printer has been selected.
In the dialog box from step 4, select the printer
whose setting is to be specified, and then either
double-click it or right-click it and click "Settings".
From the "Set paper" drop-down list, select the
label size.
Information to be displayed in the dialog box from step 4 can be entered in the "Notes" text box.
B. If multiple printers have been selected.
In the dialog box from step 4, select the printers
whose setting are to be specified, and right-click
them and click "Settings". From the "Set paper"
drop-down list, select the label size. The same
label size setting is applied to all selected
printers.
The settings below "Printer Settings" and "Notes" are not available.
6
Click [OK] to close the label size setting window.
7
Click [OK] to close the "Distributed Printing Settings" window.
Setup is completed.
8
Click [OK] to start distributed printing.
• If the selected label size is different from that displayed beside "Current paper",
beside the setting below "Current paper". Load the printer with label specified "Set paper".
• We recommend performing a connection test for your operating environment.
3
41
Distributed printing
1
2
appears
Print Page