Brother 1960C - IntelliFAX Color Inkjet Quick Setup Manual - Page 16

Browse online or download pdf Quick Setup Manual for Software Brother 1960C - IntelliFAX Color Inkjet. Brother 1960C - IntelliFAX Color Inkjet 20 pages. Quick setup guide - english
Also for Brother 1960C - IntelliFAX Color Inkjet: Brochure (2 pages)

Print Page

Setting Up the Machine

Choosing a location

Choose a location where the temperature remains

between 50° F and 95° F (10° and 35° C).

DO NOT put the cordless handset near heaters,

air conditioners, water or chemicals.

DO NOT expose the cordless handset to direct

sunlight, excessive heat, moisture, or dust.

DO NOT use the cordless handset near electro-

medical equipment.

We recommend at least 9.8 ft (3 m) between the

machine (base unit) or cordless handset and

possible sources of radio interference.

Putting up an antenna of the

base unit

Move the antenna to the up position as shown

below.

Note

Avoid using in an area where it is difficult for radio

waves to penetrate such as in a reinforced

concrete building, near metal furniture or doors.

mouse

headset

USB memory

Bluetooth product

9.8 ft

(3 m)

9.8 ft

(3 m)

Using the Fax as a printer or

for PC-Fax send

You can download the Brother printer driver and

PC-Fax send driver from the Brother Solutions Center

for use with FAX-1960C.

Visit us at: http://solutions.brother.com

Follow install instructions on the Driver download page.

Note

• Please download the printer driver first before

connecting the machine to your computer with a

USB cable.

• You must use an appropriate USB 2.0 interface

cable. If you do not have it, please purchase a

USB 2.0 interface cable that is no longer than 6

feet long (2 meters).

• Your machine has a USB interface that is compatible

with the USB 2.0 specification. This interface is also

compatible with High-Speed USB 2.0; however, the

maximum data transfer rate will be 12 Mbits/s. The

machine can also be connected to a computer that

has a USB 1.1 interface.

• Third party USB ports are not supported for

Macintosh

Note

Connecting the USB cable

1 Insert the USB cable into the USB port marked

with a

symbol. You will find the USB port next

to the handset cord port as shown below.

2 Connect the USB cable to your computer.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.