Brother DCP-130C Quick Setup Manual - Page 17

Browse online or download pdf Quick Setup Manual for Software Brother DCP-130C. Brother DCP-130C 22 pages. Windows vista
Also for Brother DCP-130C: Specification Sheet (2 pages), Quick Setup Manual (22 pages), Setup Manual (23 pages), Quick Setup Manual (24 pages), User Manual (47 pages), Quick Setup Manual (15 pages)

Print Page
Brother DCP-130C Quick Setup Manual
Installing the Driver & Software
For USB Interface Users
(For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 9.
Note
®
For Mac OS
X 10.2.0 to 10.2.3 users, upgrade to
®
Mac OS
X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2
Insert the USB cable into the USB socket
marked with a
USB socket inside the machine on the right as
shown below.
®
X 10.2.4 or greater)
®
X, visit
symbol. You will find the
3
Carefully route the USB cable through the
trench and out the back of the machine as
shown below.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
4
Lift the scanner cover to release the lock (
Gently push the scanner cover support down
(
) and close the scanner cover (
5
Turn on the machine by connecting the power
cord.
®
Macintosh
).
).
15