AEG ARCTIS Operating Instructions Manual - Page 8

Print Page

Before Use

1. Remove all adhesive tape and packaging from the interior of the appli-

ance.

Any remnants of adhesive can be removed with white spirit.

2. Remove the transport protection pieces and pull off the adhesive tape.

3. Wash the inside of the appliance with lukewarm water with a little

bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap

or detergent as the smell may linger. Dry the appliance thoroughly.

The position of the freezer part and the fridge part in the combination

fridge-freezer can be decided by the customer. However the final

assembly of the appliance or a later change in the position of the

freezer and fridge must be carried out by your local Service Force

Centre.

The appliance should be installed in a well ventilated, dry room.

Energy use and efficient performance of the appliance is affected by

the ambient temperature.

The appliance should therefore

– not be exposed to direct sunlight;

– not be installed next to radiators, cookers or other sources of heat;

– only be installed at a location whose ambient temperature

corresponds to the climate classification, for which the appliance is

designed.

818 35 95-01/9