AEG ARCTIS Operating Instructions Manual - Page 15

Print Page

10. Reposition door handle and hole

plug-pins as shown in the dia-

gram.

11. Replace base cover.

Door Alignment

If necessary, the appliance door can be aligned.

1. First remove the door (see section: "Reversing the Door").

2. Remove slider for door closer B1 (B2 for door hinged on the left).

3. Using a small screw-driver, lift out the eccentric bearing bushes as

required, above and below the door, rotate and then press in according

to the figures.

The diagram only shows a right opening door.

For left opening doors please proceed accordingly at the left of the

door at top and/or bottom.

4. Reposition slider for door closer B1 (B2 for door hinged on the left).

5. Replace the door (see section: "Reversing the Door")